<

	Opening Ceremony
09:30 am - 09:45 am	Welcome Address by the Chair
	Keynote Lecture
09:45 am - 10:45 am	Dr. S.V. Ramana Murty, Director, Gas Turbine Research Establishment, DRDO.
10:45 am - 11:00 am	High Tea
	Parallel Session 1 : KPA
11:00 am - 11:15 am	Balpartap Singh: Spacer Cation Rigidity Dictates Structural and Excited State Dynamics in 2D Halide Perovskites
11:15 am - 11:30 am	Mohammed Hadhi PP: Wafer-Scale Solution-Processed 2D-TMD Transistors and Circuits Enabled by Single-Flake Transport
11:30 am - 11:45 am	Manvendra Singh: Low-temperature fabricated solution-processed diodes for wireless paper electronics
11:45 am - 12:00 pm	Durgesh Borkar: Modulating Band Offset through Interface Engineering of Cu2SnSe3-Based Heterojunctions for Efficient Charge Separation and Collection
12:00 pm - 12:15 pm	Pooja Punetha: Nature of morphotropic phase boundary in the lead-free piezoelectric systems K1/2Bi1/2(M1/3Nb2/3)xTi1-xO3: M = Mg, Zn
12:15 pm - 12:30 pm	Amarakonda Chandana Siri: Screen printed micro-supercapacitors on paper with additive-free 1T MoS2 ink for sustainable energy solutions
12:30 pm - 12:45 pm	Kaushal Tiwari: Development of tunable ferroelectric thin films for the bandpass filters in the satellite systems
12:45 pm - 01:00 pm	Getaw Abebe Tina: Simultaneous enhancement of d33 and depolarization temperature of the morphotropic phase boundary composition of the Pb-free piezoceramic Na1/2Bi1/2TiO3– BaTiO3
	Parallel Session 2 : KI Vasu
11:00 am - 11:15 am	Prasanth Soundappan: Mechanism and mitigation of crack formation in laser based directed energy deposition of γ-TiAl powder
11:15 am - 11:30 am	Sourav Maji: Impact of Ge as an alloying addition on microstructure and high-temperature mechanical properties of 2nd Generation TiAl alloy
11:30 am - 11:45 am	Chetan Konkati: Proton irradiation effects on multi-principal element alloy
11:45 am - 12:00 pm	Raineesh Kp Babu: Room Temperature Creep in Ti6242 alloy
12:00 pm - 12:15 pm	Sita Choudhary: Effect of process parameters and heat treatment on structure and mechanical properties of directed energy deposited Ti6242 alloy
12:15 pm - 12:30 pm	Sunando Banerjee: Effect of texture, grain boundary constitution, and molybdenum partitioning on corrosion and hydrogen permeation behavior of pulse electrodeposited Ni-Mo coatings
12:30 pm - 12:45 pm	Shubham Sisodia: Enhancing fatigue resistance of Cr-Mn-Fe-Co-Ni system by varying composition and sigma-phase assisted grain-size reduction
12:45 pm - 01:00 pm	Divya Nalajala: Towards Single Crystal Growth in CMSX-4 Superalloy Builds Using Laser Directed Energy Deposition
01:00 pm - 02:00 pm	Lunch Time
	Invited Talk
02:00 pm - 02:50 pm	Mr. Sankarappa Prasad, Principal Engineer, Underwriters Laboratories.
	Parallel Session 3 : KI Vasu
02:45 pm - 03:00 pm	Abhinav Chandraker: Experimentally validated and empirically compared machine learning approach for predicting yield strength of additively manufactured multi-principal element alloys
03:00 pm - 03:15 pm	Shiba Sankar Dash: DFT study of hydrogen interstitial solute interaction with dislocations in nickel
03:15 pm - 03:30 pm	Subramanian R S: Exploring the state-of-the-art in quantum computing for computational materials science
03:30 pm - 03:45 pm	Swapnil Bhure: A Roadmap for Producing Single-Crystal Ni-Based Superalloy Components Using Laser-Directed Energy Deposition
03:45 pm - 04:00 pm	Ankur Srivastava: Diffusion analysis in binary and ternary Ni-based alloys following Experimental, Density Functional Theory (DFT) and Physics-informed neural network numerical inverse method (PINN)
	Parallel Session 4 : KPA
02:45 pm - 03:00 pm	Vimalkumar S: Upcycling post-consumer recyclate of Polyamide 66 by controlling chain scission and crosslinking density
03:00 pm - 03:15 pm	Samvidha Das: Design and Investigation of MIL-100 (Fe) Metal-Organic Frameworks for Controlled Drug Delivery
03:15 pm - 03:30 pm	Bharath Sriram Gugulothu: 3D Bioprinted Metastatic Niches of Triple Negative Breast Cancer for Drug Screening
03:30 pm - 03:45 pm	Indranil Dey: Recycling Reinvented: Converting PET Bottle Waste into 3D printable PCR Polypropylene Vitrimers for a Sustainable Future
03:45 pm - 04:00 pm	Nipun Jain: Engineering 3D bio-printed Lung-on-a-Dish platform to investigate Pulmonary Fibrosis
	Invited Talk
04:05 pm - 04:40 pm	Dr. Chandan Mondal, Scientist ‘G’, Defence Metallurgical Research Laboratory
04:40 pm - 04:50 pm	Tea Break
	Poster and Materialography
04:50 pm - 05:45 pm	Poster and Materialography Presentation

Day 2 Schedule

	Keynote Lecture
09:30 am - 10:45 am	Prof. Raman Singh, Monash University, Australia
10:45 am - 11:00 am	High Tea
	Industry - Academia Panel Discussion
11:00 am - 12:10 pm	Dr. T Ramprabhu, Joint Director, DRDO Dr. Prince Singh, Lead Engineer, Bosch Dr. Manjini S, Vice President, JSW
12:10 pm - 12:45 pm	Springer talk
	Lunch
12:45 pm - 02:00 pm	Lunch Break
	Invited Talk
02:00 pm - 02:35 pm	P. Rajamali, Asst. Professor, MRC, IISc
	Parallel Session 5 : KI Vasu
02:45 pm - 03:00 pm	Suraj Kumar: Development of High-temperature DIC (up to 1800 °C) for strain measurements
03:00 pm - 03:15 pm	Vamsi Krishna Pakki: Effect of reduction per pass during high temperature rolling of Mg-1wt%Gd alloy on texture, mechanical and its corrosion properties
03:15 pm - 03:30 pm	Darshan C: Creep and Stress Relaxation in Thin Films: Experiments, Modelling, and Materials Science-Based Insights for Reliability Improvement
03:30 pm - 03:45 pm	Kalyan D: Development of High strength and High Conductive Cu-based alloys
03:45 pm - 04:00 pm	Bavithra M: Enhanced Corrosion Resistance of AZ31 Magnesium Alloy through LDH Coating and 8-Hydroxyquinoline Intercalation
04:00 pm - 04:15 pm	Gudeta Jafo Muleta: Simultaneous increase of d33 and Curie point of PZT by dilute rare earth doping: the phenomenon and the mechanism
	Parallel Session 6 : KPA
02:45 pm - 03:00 pm	Arup Kumar Mandal: Understanding Complex Magnetic Interfacial Exchange Interactions and Magnetic Tunnel Resistance Behaviour of Epitaxially Grown SrRuO3/BiFeO3/La0.7Sr0.3MnO3 Heterostructure
03:00 pm - 03:15 pm	Satyam Jena: Harnessing Excited-State Charge Transfer for the Activation of Dark Triplet Excitons and Phosphorescence in Hybrid Organic-Inorganic 2D Perovskite
03:15 pm - 03:30 pm	Shikha Akshay Joshi: Fabrication and analysis of oxide-based ferroelectric gated transistors using the Inkjet-Printing technique
03:30 pm - 03:45 pm	Bappa Das: Semi-solid TIG-based Additive manufacturing of Al-15Mg2Si-4.5Si-0.01Sr0.015B composite
03:45 pm - 04:00 pm	Animesh Mandal: Influence of Transition Metal Doping on the Exciton Dynamics in All-Inorganic Metal Halide Perovskite
04:00 pm - 04:15 pm	Sachin Latiyan: 4D printing of sericin: Transition from textile waste to medical wealth
	Closing Ceremony
04:15 pm - 04:30 pm	Tea Break
04:30 pm - 05:30 pm	Closing Ceremony
07:00 pm - 09:00 pm	Dinner